Bravo Company Mfg.
![]()
FEATURES
-Gunfighter Vertical Grip
-Picatinny
-Flat Dark Earth
-Mounted in forward angle increases rigidity of forearm, while providing more natural wrist angle when grabbing the vertical grip.
-Mounted in reverse angle to increase control when grabbing handguard and vertical grip.
-Flat sides give better yaw control during firing and non-firing manipulations
-Aggressive texture and generous storage volume combined with modular design to allow improvements and adaptation in the future.
-Cross bolt designed to work with improvised tools (such as a quarter) allow for easy adjustment or re-tightening
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Reversible clamps allow user to setup fasteners to reside on either side
-Spring-loaded clamp makes installation and removal easier
-Made in the U.S.A.
FEATURES
-Stock Assembly
-Mod 0
-AR-15
-Flat Dark Earth
-New patent pending latch reinvents the stock's interface with a mil-spec receiver extension, providing the user with superior strength when dropped or when mortaring malfunction clearance drill.
-Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
-Modular VBOST (Vehicle Borne Operations Sling Tab)- This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
-2 different types of ambidextrous sling mounting options, including QD swivel sockets
-Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability
-Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
FEATURES
-Stock Assembly
-Mod 0
-AR-15
-Black
-New patent pending latch reinvents the stock's interface with a mil-spec receiver extension, providing the user with superior strength when dropped or when mortaring malfunction clearance drill.
-Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
-Modular VBOST (Vehicle Borne Operations Sling Tab)- This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
-2 different types of ambidextrous sling mounting options, including QD swivel sockets
-Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability
-Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
FEATURES
-Stock Kit
-Mod 0
-AR-15
-Flat Dark Earth
-Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
-Modular VBOST (Vehicle Borne Operations Sling Tab)- This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
-2 different types of ambidextrous sling mounting options, including QD swivel sockets
-Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability
-Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
Also Includes:
BCM 7075T6 Mil-Spec Receiver Extension
Locking Nut M4 (Castle)
Mil-Spec Carbine Action Spring
Carbine Buffer
BCM QD Swivel Mount End Plate
Other Features: Stock kit includes stock, buffer tube, buffer/spring/endplate, castlenut
FEATURES
-Stock Kit
-Mod 0
-AR-15
-Black
-Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
-Modular VBOST (Vehicle Borne Operations Sling Tab)- This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
-2 different types of ambidextrous sling mounting options, including QD swivel sockets
-Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability
-Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
Also Includes:
BCM 7075T6 Mil-Spec Receiver Extension
Locking Nut M4 (Castle)
Mil-Spec Carbine Action Spring
Carbine Buffer
BCM QD Swivel Mount End Plate
Other Features: Stock kit includes stock, buffer tube, buffer/spring/endplate, castlenut
FEATURES
-Gunfighter Compensator
-Fits AR-15
-Mod 1 5.56 1/2 X 28
-Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
-Dual action brake minimizes side pressure and designed to have much less noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter.
-Stainless Steel construction for maximum corrosion resistance
-Predrilled hole at the base for permanent installation.
-Includes a Crush Washer
-Should be installed by a qualified armorer.
-Extended version of the BCMGUNFIGHTER MOD 0 - 5.56
-Mount per BATF specs to bring your 14.5 inch barrel over 16 inches (non-NFA)
FEATURES
-Gunfighter Compensator
-Fits AR-15
-Mod 0 5.56 1/2 x 28
-Exterior dimensions consistent with Mil-specs for mounting flash hider mounted suppressors
-Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
-Designed to have much less side blast and noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator built for the 21st Century Gunfighter.
-Stainless Steel construction for maximum corrosion resistance
-Includes a Crush Washer
-Should be installed by a qualified armorer.
FEATURES
-Gunfighter QD End Plate
-Fits AR15/M16 Receiver
-BCM Receiver end plate with socket for Quick Disconnect (QD) swivel
-Machined from steel, and easily accommodates staking
-Made in the U.S.A.
Other Features: Socket for qd swivel (swivel not included)
FEATURES
-AR15 Enhanced Lower Parts Kit
-Flat Dark Earth
-This kit includes all the Mil-Spec quality components along with some fantastic upgrades including;
-BCM PNT Trigger Assembly
-BCM Pistol Grip, Mod 3
-BCM Enhanced Trigger Guard
-Made in the USA
FEATURES
-AR15 Enhanced Lower Parts Kit
-Black
-This kit includes all the Mil-Spec quality components along with some fantastic upgrades including;
-BCM PNT Trigger Assembly
-BCM Pistol Grip, Mod 3
-BCM Enhanced Trigger Guard
-Made in the USA
FEATURES
-Mil-Spec Buffer Tube Kit
-W/ Buffer/Spring/Hardware
-Mil-Spec Receiver Extension (6 position)
-Receiver End Plate
-Lock Nut (Castle) M4
-Action Spring Carbine
-Buffer
Other Features: Mil-spec receiver extension (6 position), receiver end plate, lock nut (castle) m4, action spring carbine, buffer
FEATURES
-Low profile gas block (steel with set screws)
-.750
-Black steel
-BCM Low Profile Gas Block for AR15, M16, M4, M4A1. Machined of steel, phosphate finish, for .750 barrels.
-Manufactured within very tight Mil-Spec tolerances on all ID's.
-Barrel ID honed after finish per USGI TDP.
-Made by Bravo Company MFG, Inc. with set screw mounting
-Set Screws are Steel 10-32 x 3/16 Knurled Cup Point
FEATURES
-Low profile gas block (steel with set screws)
-.625
-Black steel
-BCM Low Profile Gas Block for AR15, M16, M4, M4A1. Machined of steel, phosphate finish, for .625 barrels.
-Manufactured within very tight Mil-Spec tolerances on all ID's.
-Barrel ID honed after finish per USGI TDP.
-Made by Bravo Company MFG, Inc. with set screw mounting
-Set Screws are Steel 10-32 x 3/16 Knurled Cup Point
FEATURES:
-Features internal redesigns to direct the force off of the roll pin & into the body of the charging handle
during support hand only manipulations
-Makes the charging handle stronger & less prone to latch breakage.
-Aluminum
Other Features: Large latch fits ar-15
FEATURES
-Mounted in forward angle increases rigidity of forearm, while providing more natural wrist angle when
grabbing the vertical grip
-Mounted in reverse angle to increase control when grabbing handguard & vertical grip
-Flat sides give better yaw control to the shooter during firing & non-firing manipulations
-Aggressive texture & generous storage volume combined w/ modular design to allow improvements &
adaptation in the future
-Cross bolt designed to work w/ improvised tools
-Black
FEATURES
-Gunfighter Vertical Grip Short
-KeyMod
-Flat Dark Earth
-Quick detachable, Tool-less, Direct Mount KeyMod interface
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Can be mounted in reverse angle to increase control when grabbing handguard and grip
-Flat sides give better yaw control during firing and non-firing manipulations
-Aggressive texture
-Storage inside the grip
-Requires 3 KeyMod attachment hole mounting points
-Spring-loaded clamps makes installation and removal easier
-Made in the U.S.A.
FEATURES
-Gunfighter Vertical Grip Short
-Quick Detachable KeyMod Version
-Black
-Quick detachable, Tool-less, Direct Mount KeyMod interface
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Can be mounted in reverse angle to increase control when grabbing handguard and grip
-Flat sides give better yaw control during firing and non-firing manipulations
-Aggressive texture
-Storage inside the grip
-Requires 3 KeyMod attachment hole mounting points
-Spring-loaded clamps makes installation and removal easier
-Made in the U.S.A.
FEATURES
-Gunfighter Vertical Grip Short
- Fits Picatinny Rails
-Flat Dark Earth
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Aggressive texture and storage volume combined with modular design allows for improvements and adaptation in the future.
-Included isa cross bolt designed to work with improvised tools to allow for easy adjustment or re-tightening, reversible clamps which allows users to set up fasteners to reside on either side
-Spring-loaded clamps makes installation and removal easier
FEATURES
-Gunfighter Vertical Grip Mod 3
-KeyMod
-Flat Dark Earth
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Anchor and bolt system offersa simple robust design, while maintaining a lightweight 1.9 ounces.
-Flat sides give better yaw control to the shooter during firing and non-firing manipulations
-Can be mounted in reverse angle to increase control when grabbing handguard and grip
-Made in the U.S.A.
FEATURES
-Gunfighter Vertical Grip Mod 3
-KeyMod
-Black
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Anchor and bolt system offersa simple robust design, while maintaining a lightweight 1.9 ounces.
-Flat sides give better yaw control to the shooter during firing and non-firing manipulations
-Can be mounted in reverse angle to increase control when grabbing handguard and grip
-Made in the U.S.A.
Kit Includes:
-Extractor made to USGI specs (shot peened)
-Extractor pin
-BCM extractor spring (chrome silicon, heat treated & stress relieved, shot peened)
-3 USGI gas rings
-Crane Ind O-ring (Mil-Spec)
-Black extractor insert
Other Features: Extractor, extractor pin, extractor spring, usgi gas rings, o ring/extractor insert
FEATURES
-Light Mount Modular
-KeyMod
-For Surefire Scout
-Fully Ambidextrous
-Low profile and sleek design
-Durable Aluminum
-Can be mounted flush or offset to the right or left
-Matte Black Finish
Other Features: For use with surefire's scout light mounting interface
FEATURES
-Fits standard 1913 Picatinny rail interface
-Accepts standard QD push button sling swivels
-Non-rotational locking interface
-Requires two lugs & one 1913 slot to mount properly
-All steel construction
-Includes hex wrench
Other Features: Fits standard 1913 picatinny rails, accepts qd sling swivels (not included), non-rotational interface
FEATURES
-PNT Trigger Assembly
-AR-15
-Polished Nickel Teflon
-Trigger and Hammer are precision machined Mil-Spec AIS18620 per the USGI TDP
-Not to be confused with MIM commercial market parts
-Small Pin Trigger and Hammer Pins (.156"/.157")
-Three step heat treated and case hardened
-Hand polished with 300% friction reduction
-Teflon Coating
-Made in USA
Other Features: Polished sear, nickel finish for reduced creep and grittiness, teflon to reduce friction
FEATURES
-Slim, comfortable & lightweight
-Three, six-hole KeyMod mounting surfaces
-Aluminum heat shield
-Will only fit a triangle M16 type handguard retaining cap
-Flat Dark Earth
Other Features: Polymer, drop-in, fits mid-length gas systems and mil-spec front sight base
FEATURES
-Slim, comfortable & lightweight
-Three, six-hole KeyMod mounting surfaces
-Aluminum heat shield
-Will only fit a triangle M16 type handguard retaining cap
-Black
Other Features: Polymer, drop-in, fits mid-length gas systems and mil-spec front sight base
FEATURES
-Slim, comfortable & lightweight
-Three, six-hole KeyMod mounting surfaces
-Aluminum heat shield
-Will only fit a round carbine type handguard retaining cap
-Flat Dark Earth
Other Features: Polymer, drop-in, fits carbine length gas systems and mil-spec front sight base
FEATURES
-Pistol Grip
-Mod 3
-Foliage Green
-Reduced angle for improved ergonomics and trigger control
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise "beavertail" style back strap
-Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips
-Made in the USA and manufactured from high quality impact resistant polymers
-Each grip test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES
-Pistol Grip
-Mod 3
-Flat Dark Earth
-Reduced angle for improved ergonomics and trigger control
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise "beavertail" style back strap
-Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips
-Made in the USA and manufactured from high quality impact resistant polymers
-Each grip test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES
-Pistol Grip
-Mod 2 (Modular)
-Flat Dark Earth
-A new AR15 grip refined for the modern warfighter, optimized for modern weapon manipulation techniques.
-Hinged trap door with interior storage compartment and water resistant rubber gasket.
-Reduced grip angle keeps wrist in line with trigger for improved ergonomics and trigger control.
-Interchangeable inserts for either a smooth front strap or a 'duckbill' to cover trigger guard gap.
-Interchangeable backstraps for various hand sizes, weapons, and grip positions.
-Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. Same wider profile as the BCM's GUNFIGHTER Grip Mod 3.
-Made in the USA and manufactured from high quality impact resistant polymers
Other Features: Interchangeable backstraps
FEATURES
-Pistol Grip
-Mod 2 (Modular)
-Black
-A new AR15 grip refined for the modern warfighter, optimized for modern weapon manipulation techniques.
-Hinged trap door with interior storage compartment and water resistant rubber gasket.
-Reduced grip angle keeps wrist in line with trigger for improved ergonomics and trigger control.
-Interchangeable inserts for either a smooth front strap or a 'duckbill' to cover trigger guard gap.
-Interchangeable backstraps for various hand sizes, weapons, and grip positions.
-Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. Same wider profile as the BCM's GUNFIGHTER Grip Mod 3.
-Made in the USA and manufactured from high quality impact resistant polymers
Other Features: Interchangeable backstraps