Bravo Company Mfg.
![]()
FEATURES:
Material: Polymer
Finish: Flat Dark Earth
Size: For Mil-Spec tube
Snag free Design
Modular VBOST (Vehicle Borne Operations Sling Tab)
Longer overall length to fit longer "MilSpec" diameter AR10/A5/Intermediate receiver extensions
Storage compartment located in the toe of the stock, accessible through butt pad
Built in rubber butt pad for secure shoulder placement
Other Features: Storage compartment located in the toe of the stock.More pronounced sopmod cheekweld.Built in rubber butt pad for secure shoulder placement.
FEATURES
-Pistol Grip
-Mod 1
-Flat Dark Earth
-Reduced angle for improved ergonomics
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip includes both an extended modular insert to close the gap between the trigger guard and pistol grip, and a smooth modular insert for use with some rifles with larger built in trigger guards. (User can decide which one to install)
-Made in the USA and manufactured from high quality impact resistant polymers.
-Test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES:
-BCMGUNFIGHTER Stock Assembly (Widebody)
-Fits AR-15
-Flat Dark Earth
-Pronounced cheekweld (SOPMOD type)
-Snag free design
-Modular vehicle borne operations sling tab)
-Ambidextrous sling mounting system (2 different types), including QD swivel sockets
-Integrated color matched rubber butt pad
FEATURES:
-BCMGUNFIGHTER Stock Assembly (Widebody)
-Fits AR-15
-Black
-Pronounced cheekweld (SOPMOD type)
-Snag free design
-Modular vehicle borne operations sling tab)
-Ambidextrous sling mounting system (2 different types), including QD swivel sockets
-Integrated color matched rubber butt pad
FEATURES
-Pistol Grip
-Mod 0
-Flat Dark Earth
-Reduced angle for improved ergonomics
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip includes both an extended modular insert to close the gap between the trigger guard and pistol grip, and a smooth modular insert for use with some rifles with larger built in trigger guards. (User can decide which one to install)
-Made in the USA and manufactured from high quality impact resistant polymers.
-Test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES
-Pistol Grip
-Mod 0
-Black
-Reduced angle for improved ergonomics
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip includes both an extended modular insert to close the gap between the trigger guard and pistol grip, and a smooth modular insert for use with some rifles with larger built in trigger guards. (User can decide which one to install)
-Made in the USA and manufactured from high quality impact resistant polymers.
-Test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES
-Low-profile for increased mobility & decreased "snag" factor
-Comatible w/ m-lok mounting system
-Fits standard push button, quick detach sling swivel
-8-position (360°), non-rotational locking interface
-All steel construction
FEATURES
-Ultra-slim & radiused surface to allows a "round" handguard feeling, from an Octagonal profile
-Aggressive non-slip or non-reflective surface
-Ventilated for cooling
-Can be installed in either direction
-Can be cut to any length, depending on users requirements
-Each kit contains five panel strips
-Flat Dark Earth
FEATURES
-9" Rail
-Features M-LOK® compatible mounting system
-Free float handguard eliminates loads from barrel, reducing the deflection for more accurate shooting
-Precision Machined 6061-T6 Aluminum Alloy, for high strength & lightweight
-Proprietary engineered profile offers additional cross sectional strength
-Steel barrel nut, to resist movement under heat
-Hard coat anodized
-Handguard alone weighs 6.6oz
-Includes BCM® M-LOK® compatible sling mount
-1.3" Inside diamter
-1.5" wide
Other Features: Aluminum alloy
FEATURES
-7" Rail
-Features M-LOK® compatible mounting system
-Free float handguard eliminates loads from barrel, reducing the deflection for more accurate shooting
-Precision Machined 6061-T6 Aluminum Alloy, for high strength & lightweight
-Proprietary engineered profile offers additional cross sectional strength
-Steel barrel nut, to resist movement under heat
-Hard coat anodized
-Handguard alone weighs 6.6oz
-Includes BCM® M-LOK® compatible sling mount
-1.3" Inside diamter
-1.5" wide
Other Features: Aluminum alloy
FEATURES
-Rail section is made of hard anodized aircraft aluminum alloy
-Made to the mil-standard 1913 picatinny arsenal specs
-Features a snag resistant design, while retaining Mil-standards
-M-Lok® compatible
-3"
FEATURES
-10" Rail
-Features M-LOK® compatible mounting system
-Free float handguard eliminates loads from barrel, reducing the deflection for more accurate shooting
-Precision Machined 6061-T6 Aluminum Alloy, for high strength & lightweight
-Proprietary engineered profile offers additional cross sectional strength
-Steel barrel nut, to resist movement under heat
-Hard coat anodized
-Handguard alone weighs 6.6oz
-Includes BCM® M-LOK® compatible sling mount
-1.3" Inside diamter
-1.5" wide
Other Features: Aluminum alloy
FEATURES
-Fully ambidextrous
-Fits majority of popular 1" round body tactical light systems
-Design to mount on the 1:30 or 10:30 o'clock (upper 45° degree) rail positions
-Durable Aluminum construction
-Intently designed to be low-profile & snag-free
Other Features: Fits most 1" tactical lights
FEATURES
-Gunfighter Light Mount
-1"
-KeyMod Version
-Mod 0
-Black
-Fully Ambidextrous mounting; either the left or the right side of the rail system
-Fits majority of popular 1-inch round body tactical light systems
-Design to mount on the 1:30 or 10:30 o'clock (upper 45 degree) rail positions
-Strong Aluminum construction
-Intently designed to below-profile and snag-free
-Patent Pending anchoring system
-Minimal added weight, 1 oz
Other Features: Fits most 1" tactical lights
FEATURES
-Flat dark earth
-5 pack
-Made to fit ALL KeyMod mounting surfaces with seven (7) consecutive KeyMod slots
-Ultra-slim and radiused surface to allow a "round" handguard feeling
-Aggressive non-slip & non-reflective surface
-Ventilated for cooling
-Bi-directional locking tabs on either end
-5.55" x .625" x .10"
-Can be cut to any length
-Made in USA
FEATURES
-Black
-5 pack
-Made to fit ALL KeyMod mounting surfaces with seven (7) consecutive KeyMod slots
-Ultra-slim and radiused surface to allow a "round" handguard feeling
-Aggressive non-slip & non-reflective surface
-Ventilated for cooling
-Bi-directional locking tabs on either end
-5.55" x .625" x .10"
-Can be cut to any length
-Made in USA
FEATURES
-KMR Alpha
-9"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 5.6 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 9.4"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 8.0 oz on a 9" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
Other Features: Aluminum alloy
FEATURES
-KMR Alpha
-8"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 4.9 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 8.39"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 7.3 oz on a 7" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
Other Features: Aluminum alloy
FEATURES
-KMR Alpha
-7"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 4.5 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 7.39"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 6.9 oz on a 7" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
Other Features: Aluminum alloy
FEATURES
-KMR Alpha
-15"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 8.6 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 15.0"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 11 oz on a very long 15" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
Other Features: Aluminum alloy
FEATURES
-KMR Alpha
-13"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 7.8 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 13.4"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 10.2 oz on a very long 13" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
Other Features: Aluminum alloy
FEATURES
-KMR Alpha
-10"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 6.2 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 10.5"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 8.6 oz on a 10" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
Other Features: Aluminum alloy
FEATURES
-KeyMod Picatinny Nylon Rail Section
-5.5"
-Flat Dark Earth
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
FEATURES
-KeyMod Picatinny Nylon Rail Section
-5.5"
-Black
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
FEATURES
-KeyMod Picatinny Nylon Rail Section
-4"
-Flat Dark Earth
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
FEATURES
-KeyMod Picatinny Nylon Rail Section
-3"
-Flat Dark Earth
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
FEATURES
-KeyMod Picatinny Nylon Rail Section
-3"
-Black
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
FEATURES
-KeyMod Picatinny Aluminum Rail Section
-5.5"
-Black
-Rail section is made of Hard Anodized Aircraft Aluminum Alloy
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces
FEATURES
-KeyMod Picatinny Aluminum Rail Section
-4"
-Black
-Rail section is made of Hard Anodized Aircraft Aluminum Alloy
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces
FEATURES
-KeyMod Picatinny Aluminum Rail Section
-3"
-Black
-Rail section is made of Hard Anodized Aircraft Aluminum Alloy
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces
FEATURES
-Forward rake gives positive retention when using "C-clamp" method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/out significant bulk adds just the right amount of relief to the wrist w/out substantially
increasing the girth of the handguard
-Small profile is just enough to get repeatable hand position on weapon forend
-Textured in front & back for positive engagement
-Flat Dark Earth
FEATURES
-Forward rake gives positive retention when using "C-clamp" method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/out significant bulk adds just the right amount of relief to the wrist w/out substantially
increasing the girth of the handguard
-Small profile is just enough to get repeatable hand position on weapon forend
-Textured in front & back for positive engagement
-Black