Hornady

FEATURES:
-Caliber/Type30 Cal.BTHP Match™
-Diameter .308"
-Weight168 gr.
-Ballistic Coefficient .450
-Sectional Density .253
-The geometric profile works to produce low drag and flatter trajectories.
-The jacket has virtually zero tolerance for concentricity and near zero wall thickness variation.
-The angle and length of the boattail is unique to each caliber and weight of Match™ and A-MAX® bullets.
-Match bullets are not recommended for hunting.

FEATURES:
-Caliber/Type30 Cal.SP
-Diameter .308"
-Weight150 gr.
-Ballistic Coefficient .338
-Sectional Density .226
-Inner Grooves, Strategically weaken the upper section of the jacket.
-Tapered Jacket, Jacket thickness is precisely controlled for expansion at all velocities.
-One-Piece Core, Does not separate like divided cores. The InterLock® retains more mass and energy.
-Cannelure, Provides accurate and consistent crimping and also works with InterLock® ring.
-InterLock® Ring, The raised InterLock® ring is embedded in the bullet’s core.

FEATURES:
-Caliber: 30 Cal .308"
-FMJ
-125 grain
-Ballistic Coefficient: .250
-100/box

FEATURES:
-Caliber/Type22 Cal.BTHP Match™
-Diameter .224"
-Weight75 gr.
-Ballistic Coefficient .395
-Sectional Density .214
-The geometric profile works to produce low drag and flatter trajectories.
-The jacket has virtually zero tolerance for concentricity and near zero wall thickness variation.
-The angle and length of the boattail is unique to each caliber and weight of Match™ and A-MAX® bullets.
-Match bullets are not recommended for hunting.

FEATURES:
-Caliber/Type270 Cal. V-MAX®W/C
-Diameter .277"
-Weight110 gr.
-Ballistic Coefficient .370
-Sectional Density .205
-The polymer tip increases the ballistic coefficient and also initiates dramatic expansion upon impact
-Hornady® combines the sharp, pointed polymer tip with the most aerodynamic profile
-Utilizing the proper base design provides incredible in-flight stability for long-range shooting.

FEATURES:
-Caliber/Type22 Cal.SP W/C
-Diameter .224"
-Weight55 gr.
-Ballistic Coefficient .235
-Sectional Density .157
-Streamlined design for ultra flat trajectories.
-Match grade jacket design provides maximum accuracy at all ranges.
-Explosive expansion, even at low velocities.

FEATURES:
-Caliber/Type22 Cal.HP Match™
-Diameter .224"
-Weight53 gr.
-Ballistic Coefficient.218
-Sectional Density .151
-The geometric profile works to produce low drag and flatter trajectories.
-The jacket has virtually zero tolerance for concentricity and near zero wall thickness variation.
-The angle and length of the boattail is unique to each caliber and weight of Match™ and A-MAX® bullets.
-Match bullets are not recommended for hunting.

FEATURES:
-Caliber/Type22 Cal.BTHP Match™
-Diameter .224"
-Weight52 gr.
-Ballistic Coefficient .229
-Sectional Density .148
-The geometric profile works to produce low drag and flatter trajectories.
-The jacket has virtually zero tolerance for concentricity and near zero wall thickness variation.
-The angle and length of the boattail is unique to each caliber and weight of Match™ and A-MAX® bullets.
-Match bullets are not recommended for hunting.

FEATURES:
-Caliber/Type6MM V-MAX®
-Diameter .243"
-Weight58 gr.
-Ballistic Coefficient .250
-Sectional Density .140
-The polymer tip increases the ballistic coefficient and also initiates dramatic expansion upon impact
-Hornady® combines the sharp, pointed polymer tip with the most aerodynamic profile
-Utilizing the proper base design provides incredible in-flight stability for long-range shooting.

FEATURES:
-Caliber/Type22 Cal. V-MAX®
-Diameter .224"
-Weight60 gr.
-Ballistic Coefficient .265
-Sectional Density .171
-The polymer tip increases the ballistic coefficient and also initiates dramatic expansion upon impact
-Hornady® combines the sharp, pointed polymer tip with the most aerodynamic profile
-Utilizing the proper base design provides incredible in-flight stability for long-range shooting.

FEATURES:
-Caliber/Type:.38 Cal.LRN
-Diameter: .358"
-Weight:158 gr.
-Ballistic Coefficient: .159
-Sectional Density: .176
-Hornady® lead bullets are pre-lubricated and cold-swaged for total uniformity and balance
-Traditional conical and flat designs have perfect symmetry when combined with knurling at the base of the
bullet

FEATURES:
-Caliber/Type:.38 Cal.SWC-HP
-Diameter: .358"
-Weight:158 gr.
-Ballistic Coefficient: .139
-Sectional Density: .176
-Hornady® lead bullets are pre-lubricated and cold-swaged for total uniformity and balance
-Traditional conical and flat designs have perfect symmetry when combined with knurling at the base of the
bullet

FEATURES:
-Caliber/Type:.38 Cal.SWC
-Diameter: .358"
-Weight:158 gr.
-Ballistic Coefficient: .135
-Sectional Density: .176
-Hornady® lead bullets are pre-lubricated and cold-swaged for total uniformity and balance
-Traditional conical and flat designs have perfect symmetry when combined with knurling at the base of the
bullet

FEATURES
-.45 cal.
-3 pack
-Feeds bullets into existing Hornady bullet feeder dies
-Eliminates the need for a bullet feeder hopper
-Milled window in tube shows when it is almost empty
-Suitable for any progressive press with 7/8-14 thread die-stations

FEATURES
-.40 cal./10mm
-3 pack
-Feeds bullets into existing Hornady bullet feeder dies
-Eliminates the need for a bullet feeder hopper
-Milled window in tube shows when it is almost empty
-Suitable for any progressive press with 7/8-14 thread die-stations

FEATURES
-.45 ACP
-Case activated
-Solid steel collets
-Designed for the Hornady Lock-N-Load AP reloading press
-Can also be used with any other press with 7/8"-14 die threads

FEATURES
-.380 ACP/9mm
-Case activated
-Solid steel collets
-Designed for the Hornady Lock-N-Load AP reloading press
-Can also be used with any other press with 7/8"-14 die threads

FEATURES
-Loads at a rate of up to 500 rounds per hour
-Features the quickest change-over of any progressive press
-EZject system delivers 100% reliable ejection of every cartridge, every time, without any adjustments
-The Lock-N-Load AP can be changed from large to small primers as easy as 1-2-3
-Case activated powder drop will dispense a powder charge ONLY when there is a cartridge case present
-5 station quick change bushing system allows the Lock-N-Load AP to be changed very quickly
-Universal case retainer spring allows you to quickly & easily remove& replace a case at any point in the
loading process
-Automatic indexing for ultra-smooth function
-A large capacity hopper comes standard with the Lock-N-Load AP Press

Kit Includes:
-Lock-N-Load Classic Single-Stage Press
-Lock-N-Load Powder Measure
-Electronic Scale
-Powder Trickler
-Funnel
-The 9th Edition Hornady Handbook of Cartridge Reloading
-Three Lock-N-Load Die Bushings
-Primer Catcher
-Positive Priming System
-Hand-Held Priming Tool
-Universal Reloading Block
-Chamfering and Deburring Tool
-Primer Turning Plate
-One Shot Case Lube

FEATURES:
-Dry large quantities of cartridge cases & gun parts
-Four fixed trays for cases & small parts, & a fifth adjustable tray for larger gun parts
-Digitally adjust drying time from 15 minutes to two hours
-Choose from seven temperature levels for quick or gentle drying
-Easy to clean

FEATURES:
-Clean & polish large quantities of brass quickly & efficiently
-Larger drum holds up to (600) 38 Special cases, (250) 30-06 cases or equivalent
-Tumble for up to eight hours w/ digital timer
-Vibratory action cleans brass to brilliant shine
-Tumbling makes dies & other equipment operate more smoothly

FEATURES:
-Clean & polish brass cartridge cases to a brilliant shine w/ the rotary action of this tumbler, coupled w/ its
steel pin tumbling media (included)
-Six-liter drum holds 5 pounds of brass cases
-Set tumbler to run for up to eight hours in half-hour increments using the digital timer
-110V

FEATURES:
-Quickly separate brass cartridge cases from tumbling media w/ the Rotary Media Sifter
-With a few turns of the handle, media falls to the bottom of the sifter, leaving cases clean & ready to use
-Use w/ corn cob or steel pin tumbling media
-Sifter drum locks into plae for easy loading
-Clear polycarbonate lid allows user easy monitoring of progress

FEATURES
-Clean and polish large quantities of cases quickly and efficiently
-Coupled with Hornady® Tumbling Media, the cyclonic and vibratory action of the Tumbler
cleans brass to a brilliant shine
-Use the included sifter to separate the polished brass from the media
-Running time varies based on the condition of the cases and degree of cleanliness desired
-Holds up to (400) .38 Special cases, (180) 30-06 cases, or the equivalent of other like-sized cases

FEATURES
-Durable brushed aluminum housing
-High torque, low speed motor
-3 active stations so you can chamfer, deburr & clean primer pockets without having to change tools
-Includes both inside diameter & outside diameter chamfer & deburr tools
-Onboard storage for optional accessories
-Unit is compatible with 110V or 220V power

FEATURES:
-Accurately restores fired cases to the correct length no matter the thickness of the cartridge rim
-The lever locks the case in place
-The Micro Adjust cutter allows .001" changes without moving the case
-The large diameter, replaceable cutting head is made of ultra-hard tool steel & trims cases up tp .50 caliber
-Includes seven of the most popular pilot sizes:
-.22 cal., 6mm, .270 cal., 7mm, .30 cal., .38 cal., .45 cal.
*Use only standard Hornady shell holders & pilots

FEATURES:
-Take powder trickling to a new level of accuracy & efficiency
-Features variable settings to trickle all kinds of powders, ensuring the precise amount for each charge
-Its modular design means you can use it w/ or w/out the base & also makes cleanup quick & easy