Lee
![]()
Other Features: Works on all single stage presses that have 7/8-14" threads in the frame and accept universal shell-holders complete swaging set includes guided 7/8-14" threaded swage push die, both large and small ram swage holder assemblies.
Other Features: Repairs following rimless case 380 acp; 40 s&w; 45 acp; 10mm; 45 win mag; 41 ae; & 45 gap kit includes extension sleeve, push through punch, catch container, and complete instructions.
FEATURES
-Largest opening and longest stroke handle is adjustable to provide the least travel
-Rigid cast iron construction
-Adjustable handle
-Automatic primer arm
-Works with large series 1 1/4-12 dies
-Includes threaded adapter to accept standard 7/8-14 dies
-Large 1 1/8 diameter ram
-Accepts standard shell holders
FEATURES
-For small and large primers
-Used with 2006 and newer Breech Lock Challenger, Turret Press, Classic Turret Press,
Breech Lock Classic Cast, and the Classic Cast Press
Other Features: Change primers in seconds, works on all presses with the lever prime system (lps)
FEATURES
-Short and Long Charging dies
-For use with Auto-Disk, Pro-Disk and Auto-Drum Powder Measure
-Works with cases .860 to 2.620 inches long
-Works with bullet diameters .223 and larger
FEATURES
-For .38-55 Winchester
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim
FEATURES
-For .260 Remington
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim
FEATURES
-For .454 Casull
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim
FEATURES
-Pacesetter 3 die set for 7mm Ultra Magnum
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data
FEATURES
-For .260 Remington
-Collet die set
-Includes a Collet die, Dead length bullet seater die, shell holder, powder dipper, and loading data
FEATURES
-For .35 Whelen
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim
FEATURES
-For .458 Winchester Magnum
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim
FEATURES
-Factory crimp die for .300 Remington Ultra Magnum & .300 H&H
-Crimps bullet in place more firmly than any other tool
-A firm crimp improves accuracy
-Higher start pressure insures a more uniform pressure curve & less velocity variation
FEATURES
-Factory crimp die for .458 Winchester Magnum
-Crimps bullet in place more firmly than any other tool
-A firm crimp improves accuracy
-Higher start pressure insures a more uniform pressure curve & less velocity variation
FEATURES
-For .45 Colt
-4-die set
-Carbide full length die
-Bullet seating die
-Powder thru expanding die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data
FEATURES
-For .40 Smith & Wesson
-4-die set
-Carbide full length die
-Bullet seating die
-Powder thru expanding die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data
FEATURES
-For 9mm Luger
-4-die set
-Carbide full length die
-Bullet seating die
-Powder thru expanding die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data
FEATURES
-Factory crimp die for .270 Winchester Short Magnum
-Crimps bullet in place more firmly than any other tool
-A firm crimp improves accuracy
-Higher start pressure insures a more uniform pressure curve & less velocity variation
FEATURES
-.300 Winchester Magnum
-Collet die only
-Sizes just the neck
-Needs no lubrication
FEATURES
-.30-06 Springfield
-Collet die only
-Sizes just the neck
-Needs no lubrication
FEATURES
-.308 Winchester
-Collet die only
-Sizes just the neck
-Needs no lubrication
FEATURES
-.270 Winchester
-Collet die only
-Sizes just the neck
-Needs no lubrication
FEATURES
-.25-06 Remington
-Collet die only
-Sizes just the neck
-Needs no lubrication
FEATURES
-.243 Winchester
-Collet die only
-Sizes just the neck
-Needs no lubrication
FEATURES
-.22-250 Remington
-Collet die only
-Sizes just the neck
-Needs no lubrication
FEATURES
-.223 Remington
-Collet die only
-Sizes just the neck
-Needs no lubrication
FEATURES:
-Caliber: 50 BMG
-Factory Crimp
-Threads: 1-1/4" - 12
FEATURES
-Progressive 5-hole reloading kit for .45 Long Colt
-Includes: Press, full length sizing die, bullet seating/crimping die, turret, shell plate
auto-drum powder measure, rifle charging die, rifle case feeder& small primer feed
FEATURES
-Progressive 5-hole reloading kit for .45 ACP
-Includes: Press, full length sizing die, bullet seating/crimping die, turret, shell plate
auto-drum powder measure, rifle charging die, rifle case feeder& small primer feed
FEATURES
-Progressive 5-hole reloading kit for .40 Smith & Wesson
-Includes: Press, full length sizing die, bullet seating/crimping die, turret, shell plate
auto-drum powder measure, rifle charging die, rifle case feeder& small primer feed
FEATURES
-Ultimate 4-die set for 6.5 Creedmoor
-Full length resizing die
-Collet necksizing die
-Easy adjust dead length bullet seating die
-Factory Crimp Die
-Shell holder
-Powder measure
-Load data
Other Features: Includes collet neck sizer die and factory crimp die.
FEATURES
-Progressive 5-hole reloading kit for .38 Special & .357 magnum
-Includes: Press, full length sizing die, bullet seating/crimping die, turret, shell plate
auto-drum powder measure, rifle charging die, rifle case feeder& small primer feed