Odin Works
![]()
FEATURES:
-Free float
-Aluminum
-Engineered w/ advanced ergonomics for comfort & improved performance
-Continuous/uninterrupted Picatinny Rail across the top
-Accessory rails can be placed at 3, 6, & 9 o'clock positions
-QD sling mount positions at 3 & 9 o'clock
-Length: 9.5"
-Weight: 4.81oz.
Other Features: Includes one 5 slot accy rail
FEATURES:
-Free float
-Aluminum
-Engineered w/ advanced ergonomics for comfort & improved performance
-Continuous/uninterrupted Picatinny Rail across the top
-Accessory rails can be placed at 3, 6, & 9 o'clock positions
-QD sling mount positions at 3 & 9 o'clock
-Length: 15.5"
-Weight: 7oz.
Other Features: Includes one 5 slot accy rail weight: 7 oz.
FEATURES:
-1/2" drive 1 3/16" jumbo crowfoot wrench for your ODIN Works Ragna Forend installation
-Use this crowfoot wrench to torque the barrel nut to 40-50 ft lbs.
Other Features: For odin ragna barrel nuts and any barrel nut that uses a 1-3/16" wrench
FEATURES
-1/2" drive 1 1/4" jumbo crowfoot wrench for your ODIN Works .223/5.56 Forend installation
-Use to torque the barrel nut to 40-50 ft. lbs.
-NOT compatible with the ODIN Works.308 KeyMod Forend barrel nut
FEATURES:
-Caliber: 9mm
-Length: 16.1"
-Twist: 1:10"
-Works w/ Colt or Glock lowers
Other Features: Made for blowback ar9, threaded 1/2-28", 1:10 twist, works with colt or glock lowers
FEATURES:
-Extremely slim & only weighs 1lb 6.6 oz.
-223 Wylde is a hybrid of the 223 REM & 5.56. 223 Wylde has a chamber throat that is tighter than the 5.56
achieving better accuracy but still reliably functional w/ 5.56 ammunition. All DI barrels include stainless
steel tunable gas block
-Length: 16.1"
-Twist: 1:8"
Other Features: Mid-length gas placement, includes tunable low profile gas block
FEATURES
-Red anodized finish
-Machined from billet 6061 aluminum
-Works with both AR15 & AR10 lower receivers
-Compatible with KNS Pins -NOT recommended for use with BAD lever
-Four times larger than factory magazine buttons
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine without changing grip or position
-Contoured for positive depression & reduced slip
-Weight: 0.15 oz. (including button, paddle & screws)
-All parts included
-Easy drop-in installation
Other Features: Comes with screw and button,.78" wide by.94" long, works with kns pins
FEATURES:
-Allows you to rapidly change mags w/out disrupting your shooting pattern
-Easy to reach
-Ergonomic design
-Contoured for positive depression & reduced slip
Other Features: Comes with screw and button,.78" wide by.94" long, works with kns pins
FEATURES:
-Burnt Bronze
-Compatible with KNS pins
-Not recommended for use with BAD lever
-Four times larger than factory magazine buttons
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine without changing grip or position
-Contoured for positive depression & reduced slip
-Weight: 0.15oz (including button, paddle, and screws)
-All parts included
-Easy drop in installation
Other Features: Comes with screw and button,.78" wide by.94" long, works with kns pins
FEATURES:
-Compatible w/ BAD Lever & KNS Pins
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip
-Red
Other Features: Billet aluminum, works with magpul bad lever and kns pins
FEATURES:
-Made from 6061 Aluminum
-Largest profile yet, making it easily accessible by all shapes & sizes of hands & fingers
-Works w/ both AR15 & AR10 lower receivers
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip
Other Features: Billet aluminum, works with magpul bad lever and kns pins
FEATURES:
-Made from 6061 Aluminum
-Larger than a mil spec button making it easily accessible by all shapes & sizes of hands & fingers
-Works w/ both AR15 & AR10 lower receivers
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip
Other Features: Comes with screw and button,.585" wide by.75" long, works with magpul bad lever
FEATURES:
-Made from 6061 Aluminum
-Weight: .3oz
-Fits New Frontier style lowers
FEATURES
-Black
-Made from 7075 billet aluminum
-Ergonomic design for easy gripping
-Upgrades any Mil-Spec charging handle
-Allows for faster & smoother operation of the charging handle
Other Features: Upgrades any mil-spec charging handle, made of billet almuminum,
FEATURES:
-New mounting solution for Harris Style Bipods
-Used w/ the M-LOK modular mounting system
-Made from 6061 Aluminum
-Low Profile
-Black Matte Anodize
-Designed to maintain repeated grip position
-Includes M-LOK nuts, screws, & hex wrench
-It adjusts in 1/2 slot increments for precise accessory placement
-Red
Other Features: Allows harris bipods to mount to m-lok rails
FEATURES:
M-LOK to Arca
M-LOK to Harris Bi-Pod
M-LOK to Picatinny
Lightweight design
6061-T6 aluminum
Black Hard Anodized
FEATURES:
-31 piece set to complete a lower
-Machined parts, no MIM
-Hammer 8620 steel
-Trigger 8620 steel
-Disconnector 4340 steel
-Trigger Pin 4140 steel
-Bolt Catch 4340 Steel
-Polymer Pistol Grip
Other Features: 31 piece kit includes hammer, trigger, disconnector, trigger pin, bolt catch & polymer pistol grip
FEATURES:
-New mounting solution for Harris Style Bipods
-Used w/ the KeyMod interlocking rail system
-Made from 6061 Aluminum
-Low Profile
-Universal KeyMod System
-Black Matte Anodize
-Designed to maintain repeated grip position
-Includes KeyMod nuts, screws, & hex wrench
-Red
Other Features: Allows harris bipods to mount to keymod rails
FEATURES
-Low profile
-Made from 6061 aluminum
-Black matte anodized
-Universal KeyMod system
-Designed to maintain repeated grip position
-Compatible with Harris style bipods
-Includes KeyMod nuts, screws & hex wrench
-Length: 2.6"
-Weight: 0.75 oz. (including screws)
Other Features: Allows harris bipods to mount to keymod rails
FEATURES
-M-LOK 1" Flashlight Mount
-100% CNC machined out of 6061 billet aluminum
-1.03" internal diameter designed to fit any 1" flashlight
-Mount can be placed at 1, 5, 7, & 11 o'clock positions
-Adjusts in 1/2 slot increments for precise accessory placement
-No access to back side of the rail is required
-Accessories can mount with either end facing forward
-Works with both metal & polymer accessories
-Includes M-LOK nuts, screws, & hex wrench
FEATURES:
-Includes M-LOK nuts, screws, & hex wrench
-Weight: 1.4 oz
-5" long
-12 slots
-Accessory Rail can be placed at 3, 6, & 9 o'clock positions & can be joined to create continuous Pic Spec
Rail
FEATURES
-KeyMod 5-Slot Accessory Rail
-2 5/16" long
-Allows you to mount sights, lights, & other tactical accessories to your free float KeyMod forend
-KeyMod is made to VLTOR Weapons Systems KeyMod specifications (universal)
-Can be placed at 3, 6 & 9 o'clock positions & can be joined to create continuous Pic Spec rail
-Made from 6061-T6 billet aluminum
-Includes KeyMod nuts, screws & hex wrench
FEATURES:
-Designed to give you better control through a more ergonomic grip angle while not adding bulk to the front
of your rifle or pistol
-Low profile ergonomic fit
-M-LOK B1 Handstop
-Red
FEATURES
-Green anodized finish
-Works with both AR10 & AR15 uppers
-Quick release pins
-Machined out of 6061 billet aluminum
-Allows you to secure your upper while you clean or install barrels, forends, muzzle devices,
& any accessories you want to mount on your upper
Other Features: Quick release hard anodized pins, used to secure the upper for cleaning or gunsmithing
FEATURES
-For 6.5 Grendel
-5/8-24 threading
-Length: 3.06"
-Weight: 4.39 oz.
-Diameter: 1"
-Titanium sleeve
-Core & cap are machined from 416R stainless steel
-3-piece modular design makes installation simple & fast
-No shims or crush washers needed
Other Features: Titanium sleeve, isonited 416r stainless steel, 3.06" long, 4.39 oz, 1" diameter for 6.5mm, 5/8-24 threading
FEATURES
-1/2" drive 1 3/8" jumbo crowfoot wrench for your ODIN Works .308 KeyMod Forend installation
-Use to torque the barrel nut to 40-50 ft. lbs.
-NOT compatible with the ODIN Works AR15 KeyMod Forend barrel nut
Other Features: Odin uses 1-3/8" barrel nuts on their 308 barrel nuts
FEATURES:
-Red
-Made from 7075 billet aluminum
-Ergonomic design for easy gripping
-Upgrades any mil spec charging handle
Other Features: Upgrades any mil-spec charging handle, made of billet almuminum,
FEATURES:
-Allows you to rapidly change mags w/out disrupting your shooting pattern
-Ambidextrous
-Easy to reach
-Ergonomic design
-Contoured for positive depression & reduced slip
FEATURES
-Low profile
-Made from 6061 aluminum
-Black matte anodized
-Designed to maintain repeated grip position
-Compatible with Harris style bipods
-Adjusts in 1/2 slot increments for precise accessory placement
-No access to back side of the rail is required
-Accessories can mount with either end facing forward
-Works with both metal & polymer accessories
-Includes M-LOK nuts, screws & hex wrench
-Length: 2.6"
-Weight: 0.75 oz. (including screws)
Other Features: Allows harris bipods to mount to m-lok rails
FEATURES:
Length: 9"
M-LOK to Arca
Lightweight design
6061-T6 aluminum
Black Hard Anodized
FEATURES:
Length: 4"
M-LOK to Arca
Lightweight design
6061-T6 aluminum
Black Hard Anodized
FEATURES
-M-LOK 5-Slot Accessory Rail
-2 5/16" long
-Allows you to mount sights, lights, & other tactical accessories to your free float M-LOK forend
-Can be placed at 3, 6 & 9 o'clock positions & can be joined to create continuous Pic Spec rail
-Made from 6061-T6 billet aluminum
-Adjusts in 1/2 slot increments for precise accessory placement
-No access to back side of the rail is required
-Accessories can mount with either end facing forward
-Includes M-LOK nuts, screws & hex wrench