Tools

Leupold torx screwdriver

Features:
-The Torx Driver gives you a better handle on driving and securing Torx-head mounting screws, which won't strip like old-fashioned hex-head screws.

Ergo grip armorer block ar-15

FEATURES
-For AR-15
-1-piece glass filled polymer design
-1/4" mounting holes
-6 1/8" Tall x 4 5/16" Long (at the base) x 2" Wide (at the base)

Other Features: Bolt or clamp to a bench to clean and maintain an ar-15, made in usa

Leupold ring wrench

FEATURES
-For 30mm or 1" rings
-Installs rings without damaging your rifle or scope

Wheeler barrel vise with 3 oak bushings

FEATURES:
-Includes 3 wood bushings, one 1" & one 3/4" predrilled block & one solid block for custom drilling

Other Features: Barrel vise holds fast to clamp your barrel for removal or insatllation, barrel vise includes two pre-drilled oak blocks 1" and 3/4" plus a solid block for custom drilling

Je ar15 polymer vice blocks upper and lower combo

FEATURES:
-Safe clamping
-Solvent resistant
-AR-M16 platform
-Heavy duty Polymer constructed

Je ar15 polymer vice block upper receiver black

FEATURES:
-Safe clamping
-Solvent resistant
-AR-M16 platform
-Heavy duty Polymer constructed

Wheeler action wrench for savage 110 and 10 series

FEATURES:
-Savage Barrel Nut Wrench
-Fits late model Savage 10 & 110 series rifles
-Features two 1/2" square drive holes for swing bar or torque wrench. Made from 3/16" steel
-1 Notched Barrel Nut Wrench
-1 Brass Shim
-1 Smooth Barrel Nut Wrench

Other Features: Double-ended savage barrel nut wrench fits early and late model nuts on the 110 and 10 series rifles, barrel vise not included

Xs armorers block ar platform fits most ar uppers gen2
Other Features: Fits ar-15/ar-10/sr25/dpms g2, and most other ar pattern uppers, box packaging

Truglo pistol-tec armorer's block

FEATURES:
-Bright Green CREE™ LED
-300 lumen output
-Machined aircraft-grade aluminum
-Operates on included 18650 rechargeable battery
-Pressure switch included
-Includes scope mounting kit, AC/DC charger & carry case

Other Features: Pistol-tec armorer's block

Truglo glock front/rear sight tool

FEATURES:
-Front & rear sight installation tools for Glock® pistols
-Remove, install or adjust factory or after-market sights
-Approved for use w/ tritium night sights
-Compatible w/ suppressor height sights

Warne universal scope level for 34mm tubes

FEATURES:

Finish	Black
Material	Aluminum
Tube Diameter	34mm
Hand	Ambidextrous
Weight	0.09 oz

Other Features: Scope level for 30mm scopes

Trijicon glock sight tool kit all glock models except 42/43

FEATURES:
-Installation tool kit for Bright & Tough™ & HD™ Night sight sets
-For all Glock® models

Other Features: Installation tool kit for bright and tough and hd night sight sets.Will not work with suppressor sights.Not compatible with glock 42 or 43 slides

Odin vice block ar10/ar15 upper green

FEATURES
-Green anodized finish
-Works with both AR10 & AR15 uppers
-Quick release pins
-Machined out of 6061 billet aluminum
-Allows you to secure your upper while you clean or install barrels, forends, muzzle devices,
& any accessories you want to mount on your upper

Other Features: Quick release hard anodized pins, used to secure the upper for cleaning or gunsmithing

Odin crowfoot 1 3/8" for.308 ar style barrel nuts

FEATURES
-1/2" drive 1 3/8" jumbo crowfoot wrench for your ODIN Works .308 KeyMod Forend installation
-Use to torque the barrel nut to 40-50 ft. lbs.
-NOT compatible with the ODIN Works AR15 KeyMod Forend barrel nut

Other Features: Odin uses 1-3/8" barrel nuts on their 308 barrel nuts

Grace usa punch set roll pin punch set of 7 steel

FEATURES
-7-Piece Roll Spring Punch Set
-Manufactured from the highest quality high carbon molybendenum tool steel & heat treated
-Centerless ground for complete accuracy
-Reverse taper from tip of punch helps prevent punch from sticking in the work piece
-The pilot point (ball on end) helps prevent damage to wall of hole & pin & gives added control
for driving roll pins in or out
-Includes sizes 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32"
-100% Made in the USA

Other Features: Made in the usa

Grace usa glock punch 3/32" punch w/wood handle

FEATURES
-Grace USA 3/32"pin punch with J Series wood handle
-Perfect palm fit punch for Glocks & other firearms that require a 3/32" pin punch
-Made in the USA

Other Features: Made in the usa

Grace usa gun care tool kit set of 17 tools

17-Piece Gun Care Tool Set Includes:
-8-Piece Original Gun Care Screwdriver Set
-8-Piece Brass Pin Punch Set
-Sizes 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16"
-8 oz. Brass Hammer
-Compact zipper case (12" x 9" x 1.5") made from durable, soft Nufak

Other Features: Made in the usa, includes 8 pc gunsmith screwdriver set, 8 pc brass pin punches, 8oz brass hammer, & vinyl case

Grace usa hammer 4 oz brass

FEATURES
-4 oz.
-Precision manufactured
-Hand assembled within the USA
-Brass head is hand turned from CDA 360 brass rod, extruded in a USA mill & beautifully hand polished
-Hickory handle is pressed into the finished brass head & securely brass pinned

Other Features: Made in the usa

Odin vice block ar10/ar15 upper red

FEATURES
-Red anodized finish
-Works with both AR10 & AR15 uppers
-Quick release pins
-Machined out of 6061 billet aluminum
-Allows you to secure your upper while you clean or install barrels, forends, muzzle devices,
& any accessories you want to mount on your upper

Other Features: Quick release hard anodized pins, used to secure the upper for cleaning or gunsmithing

Williams shotgun bead sight drill fixture

FEATURES
-Shotgun Bead Sight Drill Fixture

Guntec ar15 roll pin holder punch set 4 piece

FEATURES:
-Heat treated steel
-Four piece hoolow end starter punch set
-All sizes needed to complete a build
-.130", .100", .086", .067"

Yhm forearm wrench for yhm rails

FEATURES
-Allows for the easy removal & installation of YHM's forearms
-A tool for tightening the barrel nut & a spanner wrench for tightening the jam nut is
incorporated intothe design
-Made from quality hardened steel
-Black oxide plated

Yhm picatinny vise jaws professional quality

FEATURES
-Simply drop into your vise & provide a solid clamping surface on any Picatinny rail
-Perfect for guaranteed alignment between your upper receiver & YHM free-float handguards

Other Features: Jaws slip in any vise to provide a solid clamping surface on any picatinny rail

Wicked tree gear replacement blade hand saw 7" wood!

FEATURES
-Replacement blade for Wicked Tough Hand Saw
-7" Blade
-Sharp Impulse hardened high carbon steel

Other Features: Sharp impulse hardened high carbon steel,7" blade

Warne universal scope level for 1" tubes

FEATURES:

Finish	Black
Material	Aluminum
Tube Diameter	1"
Hand	Ambidextrous
Weight	0.09 oz

Other Features: Scope level for 1" scopes

Warne tool 1/4" drive torque 65in lbs for tactical rings

FEATURES
-½” socket
-Preset at 65 in/lb
-Audible beep & red light illuminated when proper torque is met

Other Features: 1/4" drive, 1/2" socket included, preset at 65 in/lb, audible beep and red light illuminated when torque is met

Warne range tool
Other Features: Range tool

Winchester punch/hammer set 15 pc brass & steel punch

FEATURES
-15PiecePunch/Hammer Kit
-8 Brass Head Punches - 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16"
-4 Steel Head Punches - 2 x 1/16", 2 x 3/32"
-Professional Grade and Blow Molded Case
-2 Nylon Composite Punches - 15/64", 3/8"
-Double Faced Hammer with Steel and Nylon Heads

Other Features: Double faced hammer 8 brass head punches 1/8" 9/64" 5/32" 3/16" 7/32" 1/4" 9/32" and 5/16" 2 nylon punches 15/64" & 3/8" 4 steel head punches two 1/16" and two 3/32" all in blow molded case

Winchester 51 piece gunsmith screwdriver set with hard case

FEATURES
-DAC WinchesterGunsmith 51 Piece Screwdriver Set
-Custom TPR Molded Driver with Magnetic Tip
-12 Flat Head Bits
-8 Hex Bits
-4 Phillips Bits
-2 Extra Long Phillips Bits
-7 Torx Bits
-4 Robertson Bits
-4 Tri-Wing Bits
-3 Clutch Bits
-2 Spline Bits
-3 Torq Bits
-One 1" Socket Adaptor

Other Features: Small, compact, convenient dbl injected form fitted case custom tpr molded driver with magnetic tip/3 torq bits/ one 1" socket adapter/ 12 flat head bits/8 hex bits/ 4 phillips bits/2 extra long phillips bits/7 torx bits/4 robertson bits/4 tri-wing bits 3 clutch bits/2 spline fits/

Utg broken shell extractor.308 winchester

FEATURES
-For .308 caliber rifle cartridges
-Removes broken shell casings lodged in the chamber of a firearm
-Threaded 2-piece design to adjust overall length
-Works great on bolt action & semi-automatic rifles
-Precision machined from steel with matte black finish

Truglo armorer's wrench/multi tool steel w/powder coat

FEATURES:
-Designed & constructed w/ the purpose of helping you fix or upgrade your own AR-15
-This multi-tool has standardized tools for customizing & repairing your AR-15 platform rifles, carbines,
or pistol
-Takedown/hinge pin pusher tool is included for easy disassembly, as well as bonus 1911 barrel bushing tool,
bottle opener, & hammer

Truglo ar-15 sight tool 4/5 prong