Tools

Truglo glock mag-wrench disassembly tool glock 42/43

FEATURES:
-Removes GLOCK® factory magazines
-Easily change base plates & replace springs
-Compatible w/ GLOCK® 42/43 single stack magazines w/ factory finger extension
-Made from machined aircraft aluminum

Other Features: Removes glock factory magazines, easily change base plates and replace springs, compatible with glock 42/43 single stack magazines with factory finger extension, made from machined aircraft aluminum, also works with double stack mags

Truglo glock channel liner combo tool
Other Features: Glock channel liner combo tool

Truglo glock front sight tool

FEATURES
-Easily removes/installs Glock front sights

Truglo glock disassembly tool and punch

FEATURES:
-Compatible w/ all Glock models & many other firearms
-Useful for the removal of action/trigger pins during disassembly
-Disassembly tool/punch

Other Features: Compatible with all glock models and many other firearms , useful for the removal of action/trigger pins during disassembly

Utg sight tool ak47 for front sight adjustment

FEATURES
-An essential tool to make fine windage & elevation adjustments to the front sight of your
SKS, AK, MAK, & SLR95 type rifles
-Completely new design to achieve most stabilized & controlled adjustment
-Ergonomic grip comfort & higher strength

Other Features: For ak, sks, mak, slr95 rifles

Grace usa punch set roll pin holder set of 5 steel

FEATURES
-5 Roll Pin Holder Set
-Designed to accurately hold roll pin sizes 1/16", 5/64", 3/32", 1/8", 3.5mm
-Manufactured from high carbon 5160 steel
-Hardened from tip through working end by using Bainite heat treating process for extra strength
-A single groove in the handle is for quick identification
-The 1/16" is notched to clear M16/AR-15 rear sights
-The 3.5mm is excellent for holding the pin that retains the breech block on Sig handguns
-100% Made in the USA

Other Features: Made in the usa

Grace usa screwdriver set 4pc phillips

Grace usa roll pin punch set steel 12pc w/vinyl pouch

FEATURES:
-High Carbon Molbendenum Tool Steel
-Has a reverse taper from tip of punch to help prevent punch from sticking in the work piece
-Manufactured from hex stock vs. round which helps stabilize punch from rolling away from user

Other Features: Made in the usa

Roll pin wizard bolt catch roll pin tool for ar-15
Other Features: Easily installs and removes bolt catch roll pin, eliminates scratching without the need for a starter punch two in one tool also installs pivot pin and spring gen ii longer than original sits closer to receiver roll pin removal easier

Mountain tactical rapid level for 1" scopes black
Other Features: Rapid level for 1" scopes

Grace usa screwdriver scope screwdriver

FEATURES
-Precision manufactured
-Hand assembled in the United States
-Constructed of USA 8650 chromium-vanadium steel alloy blades
-Black oxide finish
-Handle composed of turned Maine hardwood, topped off with a nickel-plated steel ferule
-100% Made in the USA

Other Features: Made in the usa

J&e ar15/m16 charging handle black
Other Features: Standard ar15 charging handle, machined from 6061 t6 aluminum ,anodized finish,weighs.08lb

J&e ar15 nsr style barrel nut shim 3pk
Other Features: Handguard shims

Grace usa punch set punch set of 8 brass

FEATURES
-8-Piece Brass Pin Punch Set
-Manufactured from high quality CDA 360 hex brass rod
-Beautifully polished
-Machine turned & designed for critical work where non-marring & non-sparking are of importance
-Carefully made to fit many pins or used to gently move steel objects
-Includes sizes 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16"
-Packed in a quality tool toll
-100% Made in the USA

Other Features: Made in the usa

Grace usa punch set punch set of 7 steel

FEATURES
-7-Piece Steel Punch Set
-Designed for meticulous work on detailed projects
-Made from high carbon molybendenum tool steel
-Heat treated & hardened the entire length with tempered striking end
-Centerless ground for complete accuracy
-Reverse taper from tip of punch helps prevent punch from sticking in the work piece
-Manufactured from hex stock steel vs. round, which helps stabilize punch from rolling away from user
-Packed in a vinyl pouch
-100% Made in the USA

Other Features: Made in the usa

Grace usa screwdriver set micro set of6

Features:
-6-Piece Micro Screwdriver Set
-Each screwdriver is constructed of USA chromium-vanadium steel alloy blades
-Black oxide finish
-Handles are composed of turned Maine hardwood, topped off with a nickel-plated steel ferule
-100% Made in the USA

Set Includes:
-3 Micro Phillips (#00, #000, #0000)
-3 Matching Slotted Tips (3/32", 5/64", 1/16")

Other Features: Made in the usa micro phillips #00,#000,#0000 micro slotted 3/32, 5/64, 1/16

Mi upper receiver rod tool for ar15 builds
Other Features: Ultimate tool for barrel nut installs or removal, excellent for removing seized barrel nuts without damaging upper designed for muzzle device installs and will not damage index pin, works with standard m4/m16 barrel extensions

Mi stock wrench for ar-15

FEATURES:
-This stock wrench will also accept a 1/2" torque wrench so you can get the nut properly torqued.
-Very well made & durable

Other Features: Fits ar-15 castle nut on rear stock.Made in usa

Mi cz scorpion pistol barrel nut socket

FEATURES:
-Makes removal of the barrel nut much easier w/out having to remove the flash hider retaining clip
-Steel construction w/ a black oxide finish
-1.5" length

Mi a2 sight tool wrench for ar-15

FEATURES
-Precision machined from stress-proof steel
-Square notches that engage the sight with a precise fit to give the operator precise sight adjustment
-A knurled non-slip handle with a lanyard hole for a lifetime of convenient operation

Other Features: Fits a2 front ar-15 sight post made in usa

Mi upper receiver rod.308 tool for sr25/ar10 builds
Other Features: Ultimate tool for barrel nut installs or removal, excellent for removing seized barrel nuts without damaging upper designed for muzzle device installs and will not damage index pin, works with lr308 and ar10 barrels and receivers

Mi hand guard removal tool for ar-15

FEATURES:
-Provides easy removal of the handguards on both carbines & full sized rifles
-Durable steel construction
-Surgical plastic contact points to prevent scratches & protect the finish of your rilfe
-Measures 9"

Other Features: Holds back delta ring for easy hanguard removal.Made in usa

Magpul bev block armorers tool barrel extension vise

FEATURES:
-Provides support for all AR-15/M4 upper & lower receivers
-Solidly engages barrel extension with steel lugs
-Full-length steel support shank
-Body made from the same high-quality polymer as other Magpul products

Other Features: Vise block tool for ar assembly operations of barrel nuts, flash hiders etc.Vise not included (required)

Magpul armorers wrench ar15/m4 multi-function

FEATURES:
-American-made with US steel
-Heat-treated steel construction with manganese phosphate finish
-USGI barrel nut wrench
-Free-float tube barrel nut wrench
-1/2" torque wrench/breaker bar interface
-Armorer's hammer
-Rifle-length/Entry-length receiver extension wrench
-USGI castle nut wrench*, usable with aftermarket end plates such as the ASAP® and ASAP®-QD
-3/4" wrench for most flash hiders/muzzle brakes
-USGI torque spec references
-Bottle opener

*Note: Not compatible with larger pistol-style receiver extension tubes

Other Features: Made in usa, for mil-spec and pin style barrel nuts, fits standard flash hiders, removes rifle rec.Extentions, carbine castle nuts, works with 1/2 torque wrench (not included)

Michaels step drill set for mounting swivel studs in wood

FEATURES:
-Special blade cuts cleanly without drawing down or splintering wood
-Step shoulder countersinks to correct depth in one operation
-One drill for forend, one for rear

Kns ar15 hammer/trigger pin assembly guide ar15/m16
Other Features: Makes it easy to remove and install ar-15 trigger and hammer pins

Ka-bar gun tool 5" w/allen/ flat/phillips/punch/torque

FEATURES:
-Handle: aluminum
-The bits are held inside the frame magnetically
-3 Allen heads
-Flat head & phillips screwdriver
-2 punches
-4 Torque

Other Features: Allen heads, flat heads, phillips head #2, punch, torque wrench, 5" length,.4lb

Grace usa hook & pick set set of 6 steel

Features:
-6-Piece Hook & Pick Set
-Each hook & pick is made with USA chromium-vanadium 8650 alloy steel
-Black oxide finish
-Nickel plated steel ferrule is hand assembled to the hardwood handle
-100% Made in the USA

Set Includes:
-1/8" Small Scribe
-30° Bent Pick
-90° Bent Pick
-Double Bend Pick
-180° Loop Pick
-180° Hook Pick
-Packed in a vinyl pouch

Other Features: Made in the usa

Grace usa screwdriver set original gun care set of8

FEATURES
-8-Piece Original Gun Care Screwdriver Set
-Custom hollow ground to fit scope screws, plug screws, guard screws, floor plate,
sight screws, & many other gun screws
-The square shanked blades are hardened to R/C 52-56
-Handle made from Maine hardwood, protected with a nicely stained finish
-100% Made in the USA

Other Features: Made in the usa

Grace usa screwdriver set pistolsmith gun care set of7

FEATURES
-7-Piece Screwdriver Set
-Hollow ground to fit a wide range of screws found on handguns
-Constructed of USA 8650 chromium-vanadium steel alloy blades
-Black oxide finish
-Handles composed of turned Maine hardwood, topped off with a nickel-plated steel ferule
-100% Made in the USA

Other Features: Made in the usa

Hme ratchet pruners heavy duty

FEATURES
-All metal handles
-Cut through up to 1" branches
-Lock in the closed position for easy transport
-Perfect for cutting shooting lanes, clearing trails, turkey hunting, camping, or hiking
-The blaze orange handle will make the shears much easier to locate if dropped

Other Features: All metal handles,lock in closed position for safe transport,dependable ratcheting mechanism,easily cuts up to 1" branches perfect for cutting shooting lanes,cutting trails,camping, & hiking.

Grovtec sling swivel stud installation tool.

FEATURES
-Sling Stud Installation Tool
-Constructed of heat-treated carbon steel
-Will not damage stock finish
-Hex base designed to fit any standard drill chuck or 1/4" nut driver