Traditions
![]()
Other Features: 5mm fits most traditons and cva flintlocks
FEATURES:
-Straight brass gun hangers are a great way to display your rifle or pistol.
-Simply screw into wall & hang
FEATURES:
-The curved brass gun hangers come with felt lining to protect your rifle while on display & are easy to
install
-Each hanger comes with two screws for attachment.
-The perfect way to show off your favorite rifle
Other Features: Includes screws, fits most rifles, shotguns and muzzleloaders
Other Features: For.44 caliber blackpowder revolvers
FEATURES:
-This rod is extremely sturdy & durable
-It breaks down into 4 separate pieces for easy storage & transport
-It features a removable T-handle which can be used in 2 different positions to make loading/cleaning
easier & more comfortable
-The end has 10/32 threads for use with other accessories like cleaning brushes
Other Features: 10/32" threads, for.45 cal or larger muzzleloaders, breaks into 4 seperate pieces for easy transport
FEATURES
-A must with scoped muzzleloaders!
-A steel wrench that will remove 209, musket & #11 nipples plus the breech plug from
Traditions™ In-Line muzzleloaders.
-Use the end with the larger opening to remove 209 nipples & breech plugs
-Use the end with the smaller opening to remove #11 & musket nipples
-Steel handle included
-This wrench replaces the A1356 & A1406 wrenches
Other Features: Handle incl'd this wrench replaces the a1356 & a1406 wrenches
Other Features: .50 caliber sabots with.45 diammeter 240 grain bullets
FEATURES
-Double ended wrench for in-line muzzleloaders
-Lightweight
-Easy to carry
-Fits most side-locks too
-Fits #11 & musket nipple
Other Features: A two ended wrench - one end fits #11 nipples & the other end fits musket nipples lightweight, easy to carry fits most side locks, too.
FEATURES
-Brass body
-Push-up slide extends nipple pick at angle to reach in-line rifle nipples
Other Features: Push0-up slide extends nipple pick at an angle to reach in- line rifle nipples
FEATURES
-Holds twelve 209 primers
-Easy to use
-Just squeeze lanyard loop to remove from body, load primers, & replace lanyard loop
-Can be used on most in-line muzzleloaders
Other Features: Easy to use squeeze lanyard loop to remove from capper, load primers, & replace lanyard loop can use w/most in-line ml'rs
FEATURES
-Designed to utilize musket percussion caps for greater ignition
-Not for use with the Thunder Dome™ Breech Plug
-Fits Traditions™ in-line muzzleloaders with M6x1 threads
-2 per package
Other Features: M6 x 1 threads 2 per pack utilizes musket percussion cap not for use with thunder dome breech plug
FEATURES
-Easilyremoves fouling in the nipple channels on percussion muzzleloaders & the touch hole of flintlocks
-A lanyard ring on the protective case makes it easy to carry
Other Features: Use for fast, easy removal of fouling in the nipple channels on percussion ml's & the touch hole of flintlocks.Lanyard ring on protective case.
FEATURES
-Solid brass aligner
-Specially designed to reduce bullet distortion during loading of sabot & conical bullets
-10/32 thread
-For .50 cal.
Other Features: Threads onto any loading tool which accepts 10/32 threads.
FEATURES:
-Comfortable round-handle w/ aluminum short & long starter rods
-Conveniently screws onto your ramrod to serve as an extension/palm saver
-Fits .32 to .58 caliber
-10/32 threads on both ends
FEATURES
-2-piece
-Blued
-For round barrels
-Fits Traditions Lightning & Buckhunter rifle models
Other Features: Fits round barrels fits bolt and slide action muzzleloaders will not fit break open models
FEATURES
-Holds your projectile & pre-measured powder
-Each tube can hold up to 150 grains of loose or pelletized powder
-Able to be used with all calibers
-3 per package
Other Features: Use with all calibers
FEATURES
-All-in-one loader & starter
-Holds three 50 grain Pyrodex® pellets in one end
-Holds a projectile in the other end
-The tops can be used as a capper: one #11 and one musket
-"T" functions as a convenient ball starter
-2 per pack
Other Features: 2 per pack all-in-one loader and starter tops can be used as a capper one #11 and one musket "t" functions as ball starter
FEATURES:
-Will handle any magnum load, pelletized or loose & bullets up to .50 caliber
-Designed for .50 caliber bullets only & comes in a convenient package of 3 loaders
FEATURES
-Perfectly sized for revolver chambers & small-bore muzzleloaders
-Accurately measures loads from 5 to 45 grains.
-Solid brass
FEATURES
-Wooden handle
-Fits over ramrod to relieve pressure on your hand when loading projectiles
FEATURES
-Solid brass jag
-Designed to hold patch securely when cleaning
-The concave end eases in loading
-10/32 thread
-For .50 cal.
Other Features: 10/32 thread the concave end assists in loading
FEATURES
-Fits 6 x 3/4 Pietta revolvers
-3 pack
FEATURES
-Water resistant
-15' length
-Green
Other Features: Completely water resistant
FEATURES
-Fits all 1851, 1860 & 1858 revolvers
-Nipple pick attached to brass cap
Other Features: Nipple pick attached to the brass cap
FEATURES:
-Designed specifically for use w/ Flintlock Rifles & Pistols
-This compact pan primer flask dispenses 3 grains of 4F priming powder from spring-activated spout
-The primer also includes a lanyard hole for easy carrying
FEATURES
-Replacement for that easy-to-lose part
-Color case-hardened steel
-Fits most Traditions™ (and similar-sized) rifle barrel tenons
FEATURES
-Already lubed for quick reloads
-100% cotton patches lubed with the all-natural WonderLube 1000 Plus™
-Proven to reduce fouling & save loading& cleaning time
-For .50-.54 cal.
-100 patches per bag
Other Features: Lubricated with all natural wonderlube 1000 plus
FEATURES
-Handy for bench & field cleaning
-Bronze brush is sturdy for thorough cleaning
-Cotton swab cleans & oils
-Threaded for all Traditions™ & similar ramrods
-10/32 threaded
-For .50 cal.
Other Features: 10/32 threaded - fits all traditions and similar ramrods
FEATURES
-Fits all Traditions metal flasks & many others.
-75 & 100 grain spouts are sized for the most commonly recommended
loadsso your loading sequence can be quicker & easier
Other Features: Fits all traditions flasks
FEATURES
-Extra-long 37 3/4” PVC rod
-Underneath cleaning jag is a threaded female end which accepts ramrod attachments
-Unscrew again to expose a ball/patch puller
-10/32 thread
-For .50 cal.
Other Features: Includes: ribbed cleaning jag & ball/patch puller female threads which accept any 10/32 accessory
FEATURES
-Lightweight, non-glare starter
-Minimizes weight without sacrificing strength & performance
FEATURES
-Traditional design
-Solid hardwood & brass
-Sure grip to start most balls or bullets